RM Solar S Class 20 Manual de Instruções descarregar pdf (Página 19)

19 20

6.2.3 Drill the holes on each marked position with a high quality 25 mm masonry bit. Make

sure the drill does not spin too fast or you may break the tile/slate. Do not penetrate

beyond the tile/slate. After drilling the holes into the tile/slates, use an 8 mm wood bit

to make a hole through the rafters at each position. Bolt the bottom part of the self

sealing bolt tting into each drilled hole.

6.2.4 Use the bolt kit M6x 6 to connect the L-rails to the self sealing bolt tting. TAKE

CARE: The L-rails must be mounted into the long adjustable slot.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Sem comentários

RM Solar S Class 20 Manual de Instruções Página 19