RM Solar S Class 20 Manual de Instruções descarregar pdf (Página 51)

51 52

7.11 Finally the panels should be secured to the frame using the wind clamps. Position

the wind clamps at the top and bottom in the centre of each panel.

7.12 When the panels are connected together and the pipe work is complete the system

should be pressure tested to 6 bar using either compressed air or RM Solar glycol,

vented, and checked for leaks, and lled with the water/glycol mix. If you are tting

an in roof system, do the pressure test before you t the top and side ashings. For

lling instructions see part 14 of these instructions.

Note:

S Class M Class Econ

Max In A Row 3 10 5

Number Of Inlets 2 at top 1 each corner 1 each corner

Temperature Sensor Top Right Top Right On Air Vent

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

Sem comentários

RM Solar S Class 20 Manual de Instruções Página 51